Overview
The WireStacker 1000 is a passive wire stacking system with guide channel and collecting tray. It handles cable lengths up to 3 m (10 ft) and wires as small as 0.34 mm² (22 AWG).
Processing Capabilities
Application Range
The WireStacker 1000 is a passive wire stacking system witch guides and collects wires that have been processed with Schleuniger Cut & Strip Machines.
Cable Diameter : 25 mm
Coil Height : Adjustable: 610 mm (24”) up to 1‘060 mm (42”)
Stacking Concept : Passive
Cable Length : Up to 3000 mm (120”), longer lengths possible but cable depending
Dereeling Concept : n/a
Storage : Spool dereeling
Dimensions (L x W x H) : 3‘000 x 470 x 1‘170 mm (120" x 18.5" x 46”)
Weight : 55 kg (117 Ibs.)
CE-Conformity : The WireStacker 1000 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Function
The wire is fed through the ejector pipe of the wire stacker by the machine’s transport rollers. After processing each wire, the machine sends a control signal to the wire stacker making it drop the wire from the collection tube into the collection tray. The WireStacker 1000 can handle wires as small as 0.75 mm² (22 AWG).
Features
- Low cost solution allowing unattended operation
- WireStacker 1000 stack wire up to a length of 3.0 m (10 ft.)
- Greatly reduces labour involved in handling long wires
- Passive design built for almost unlimited and trouble free cycles
- Feed through design for handling lengths longer than 3.0 m (10 ft.)
- Uses dedicated wire stacker interface on the EcoStrip 9300 / 9320, OmniStrip 9450, PowerStrip 9500 / 9550 and MegaStrip 9600
- Extruded aluminium frame and all stainless steel construction
- Works equally well with short or long wires
