Uni-G Applicator
BackOverview
The pneumatic Uni-G applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction.
- Suitable for automatic and semi-automatic crimping processes
- Virtually unlimited application range
- Simple operation and robust design
- Less wear due to high precision feeding system
Application Range
Uni-G applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction. Handling and set up has never been easier. The Uni-G is suitable for use on automatic wire processing systems as well as on bench-top presses for terminals with either metal, plastic or Mylar tape carrier strips. All applicators utilize a simple and reliable pneumatic feed system.
Crimp Height Adjustment :
Max. 1.6 mm (0.06”)
Increment: 0.02 mm (0.0008”)
Insulation Crimp Height Adjustment :
Max. 1.8 mm (0.07”)
Increment: 0.03 mm (0.001”)
Terminal Pitch :
Side Feed Max. Pitch 37 mm (1.46”)
Max. Length 54 mm (2.13”)
End Feed Max. Pitch 38 mm (1.50”)
Feed Stroke :
Min. 1 mm (0.04”)
Max. 37 mm (1.46”)
Applicator : Crimp applicator PrismaCrimper (optional Daniels WA27 or WA22)
Feed Type : Mechanical
Cross Section Range : 0.08 – 6 mm² (28 – 10 AWG)
Press Stroke : 44 - 38 mm (1.73" or 1.50") Other strokes available on request
Dimensions (L x W x H) :
Uni-G side feed 100 x 180 x 160 mm (3.93“ x 7.08“ x 6.29“)
Uni-G end feed 190 x 90 x 160 mm (7.48“ x 3.54“ x 6.29“)
Weight : 4 kg (8.81 lbs.)
CE-Conformity : The Uni-G Applicator fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Function
- Uni-G applicators are suitable for the following types of contact carrier strip positions:
- Side feed: front-banded, middle-banded, rear-banded, double-banded, mylar tape, end ferrules
- End feed: side-banded, longitudinal feed
Options
- Terminal lubricating device
- Active terminal ejector
- Wire insertion assist (open barrel terminals)
- Conductor strand positioner
- 7-digit counter
- Integrated wire funnels (closed barrel terminals)
Features
- Simple operation and robust design
- The forward-stroke and bellmouth adjustments can easily be made while the applicator is mounted in the press
- Less wear due to the high precision feeding system
- Very wide range of applications
- Can be used in automatic and bench-top machines and many stripper- crimpers