Overview
The UniCrimp 500 A is a crimping machine with 5 tons of press forces. It processes both rear and side feed banded terminals (open or closed barrel type) for cable cross sections up to 16 mm² (6 AWG).
- For processing large cable cross sections up to 16 mm² (6 AWG)
- For processing rear and side feed banded terminals
- Short cycle times
- Quick-change applicator base plate
- Optional crimp force monitoring
Application Range
The UniCrimp 500 A is a heavy duty crimping station for use with the CrimpCenter 67 HD16 automatic cut, strip, and terminate machine. For ease of set-up, the UniCrimp 500 A is equipped with a creep mode. This enables the drive mechanism to be moved backwards and forwards slowly, to facilitate visual checking.
Crimping Force : 49 kN (5 tons)
Wire Size Range : Up to 16 mm² (6 AWG)
Cycle Time : 1 s
Stroke : 40 mm (1.58”)
Shut Height :
Standard: 158.38 (6.23“)
Optional: 135.78 (5.34“)
Dimensions (L x W x H) : 390 x 550 x 1.290 mm, (15.35” x 21.65” x 50.78”) Without base frame
Weight : 197 kg (434 lbs.)
CE-Conformity : The UniCrimp 500 A fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Function
With 5 tons of crimping force, the UniCrimp 500 A processes wire cross-sections up to 16 mm² (5 AWG) with the proper crimp applicator for both side- or rear feed banded terminals can be used. The UniCrimp 500 A is user-friendly and can be equipped with a crimp force monitoring option.
Options
- Alternative applicator adapter plates
- Crimp Force Monitoring
- Pneumatic feed kit
- Ring bolt M16 (for transportation with a lifting jack)
- Transport cases for air- / sea- / truck-packing
Features
- Combined crank / knee lever drive for tremendous power generation
- Quick-change applicator base plate
- Creep mode for easy set-up
