CoaxStrip 5300 NT
BackOverview
The CoaxStrip 5300 NT is a fully programmable multi-step stripping machine for micro-coaxial, coaxial, triaxial, multi-conductor cable and single conductor wire. This benchtop unit can easily process cables with inner conductors ranging from 0.15 mm (36 AWG) up to 4 mm (0.157'') maximum cable outer diameter and strips lengths up to 27 mm (1.06").
Material
- Solid Wire
- Cable
- Discrete Wire
- Stranded Wire
- Multi-conductor Cable
- Single Conductor Cable
- Wire
- Triaxial Cable
- Coaxial Cable
- Rubber
- PVC
- PUR
- Tefzel®
- Teflon®
- Paper / Cardbord
- Kapton
- Micro-triaxial Cable
- Micro-coaxial Cable
Processing Capabilities
- Stripping
- Wire List Processing
- Coaxial Cable Processing
- Jacket Stripping
- Multiple Strip
- Multiple Step
- Multiple Layer Stripping
Application Range
The CoaxStrip 5300 NT is a fully programmable multi-step stripping machine for microcoaxial, coaxial, triaxial, multiconductor cable and single conductor wire. Sophisticated centering and incision mechanics allow high precision processing of cables that are difficult to handle such as microcoaxial cables, cables with soft insulation, or dielectric materials. State-of-the-art electronics, a user-friendly graphic display and precision mechanics guarantee repetitive, unmatched Schleuniger stripping quality.
Min. Diameter mm : 0.15 mm (36 AWG / 0.006“)
Max. Diameter mm : 4 mm (0.157“)
Diameter Increments : 0.01 mm (0.001)
Max. Stripping Length : 27 mm (1.06")
Stripping Length Increments : 0.01 mm (0.001)
Cable Clamping : Motor driven with programmable clamping force
Stripping Steps : 9
Cycle Time : ≥ 4 s (depending upon cable type and programming)
Dimensions (L x W x H) : 494 x 140 x 218 mm (19.4" x 5.5" x 8.6”)
Weight : 10 kg (22 Ibs.)
CE-Conformity : The CoaxStrip 5300 NT fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Programmable Processing Parameters
- Pull-off with or without rotation of the stripping head
- Pull-off speed
- Stripping lenghts partial strip
- Stripping lengths full strip
- Extra spin time of the stripping head
- Spindle direction of the stripping head
- Rotational speed of the stripping head
- Stripping diameter
- Stripping Position
- Freely selectable stripping sequence
- Wayback (opens blades slightly before pulling off)
- Feed rate of the stripping blades
Features
- Wire list processing
- Iguana TM Wire Processing software (optional)
- Diagnostics features
- Password protect with different user levels