CoaxStrip 5200
BackOverview
The CoaxStrip 5200 is a semi-automatic, programmable multi-step stripping machine for coaxial, multiconductor cable and single conductor wire. The CoaxStrip 5200 can process cables up to 7 mm (0.27") outer diameter and strip lengths up to 33 mm (1.29").
- High precision rotary stripping up to 3 steps
- Menu guided programming with user friendly color touch panel
- No mechanical adjustments required when changing wire sizes
- Very sensitive trigger sensor
- Operator has clear view of the entire working area
Processing Capabilities
- Coaxial-, Multi Conductor Cable and Single Conductor Wire
- Stripping
- Coaxial Cable Processing
- Jacket Stripping
- Multiple Strip
- Multiple Layer Stripping
Application Range
Coaxial cable, multiconductor cable and single conductor wire from 1.1 up to 7 mm (0.04 up to 0.27") outer diameter and strip lengths from 0.1 up to 33 mm (0.003 up to 1.29").
Max. Cable Diameter : 7 mm (0.276“)
Diameter Increments : 0.01 mm (0.001“)
Wire Cross Section : 0.032 - 6 mm² (32 - 10 AWG)
Max. Stripping Length : 33 mm (1.30“)
Stripping Length Increments : 0.01 mm (0.001”)
Max. Stripping Steps : 3
Cable Clamping : Motor driven with programmable clamping force
Cycle Time : ≥ 4.2 s (depending upon cable type and programming)
Production Rate : max. 650 pcs./h (depending upon cable type and programming)
Program Capacity : 1,000 cables
Interfaces : Foot pedal, USB "Host“
Noise Level : < 70 db (A)
Power Supply : 100/115 VAC, 230/240 VAC, 100 VAC, 50/60 Hz
Dimensions (L x W x H) : 390 x 130 x 280 mm (15.3 x 5.1 x 11.0”)
Weight : 10 kg (22 lbs.)
CE–Conformity : The CoaxStrip 5200 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note : Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.
Function
The CoaxStrip 5200 begins the stripping process when the cable end touches the trigger sensor. The cable is automatically clamped and the stripping process is performed according to the programmed values. As soon as the cable is processed the clamping jaws open and it can be taken by the operator.
Features
- Intuitive color touch screen user interface
- No mechanical adjustments required when changing wire sizes
- Very sensitive trigger sensor – works great for small, flexible wires
- Operator has clear view of the entire working area