SemiRigid 1050
BackOverview
Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).
- High precision and well-proven mechanics compared to the previous model SemiRigid 1000
- User friendly high resolution 7” color touchscreen
- Intuitive and easy programming thanks to the excellent menu navigation and predefined cable ends
- Many useful wizards for machine setup and maintenance
- Appealing design and ergonomics
Processing Capabilities
- Stripping and pointing of inner conductor
- Stripping (groove only) of outer conductor
- Stripping and pointing of inner conductor on cable with soldered connector already in place
Application Range
Semi-rigid coaxial cables from 0.86 (0.034”) up to 4.50 mm (0.177”) outer diameter and strip lengths from 0.10 (0.004”) up to 30 mm (1.18”).
Cable Diameter :
Max. 4.50 mm (0.177“)
Min. 0.86 mm (0.034“)
Stripping Length : Max. 30 mm (1.18“)
Increments :
Length: 0.01 mm (0.00039“) steps
Diameter: 0.01 mm (0.00039“) steps
Stripping Blades :
For turning and removing: 2 pcs.
For turning: 2 pcs. (1 each)
For pointing: 1 set (4 pcs.)
Cycle Rate : > 3 s, (depending upon cable type and programming)
Program Capacity : 1‘000 cables
Interfaces : 2x USB "Host", Footpedal, Ethernet (on request)
Noise Level : < 70 db (A)
Power Supply : 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz
Air Pressure : 6 bar / 0.6 MPa / 87 psi
Air Consumption per Cycle : 7-30 l at 6 bar (87 psi), (depending upon cable type and programming)
Dimensions (L x W x H) : 566 x 215 x 252 mm (22.3 x 8.5 x 9.9“)
Weight : Net 19.5 kg (43 lbs)
CE – Conformity : The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note : Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.
Function
The operator inserts the cable and starts the stripping process by pressing the footpedal. As soon as the cable is processed, the grippers open and the cable can be removed by the operator.